I fiddle with the throttle bodies sync and now the bike is much smoother than before. However another problem has arisen. The bike idle higher than usually. Seems fine when the bike first started seems to hover around 1400rpm but after some riding and coming to a red light with clutch in and in first gear the bike idle around 1800 sometime 2000rpm. Slight release of the clutch and grabbing it again will lower the idle to 1500 but then slow creep back up.
I will adjust the idle tomorrow but don't want to lower it too much that it will not be enough when i first start the bike.
Anything else i should pay attention to?
One other source it could be is the PCV. Maybe i need to perform the throttle calibration again.
I will adjust the idle tomorrow but don't want to lower it too much that it will not be enough when i first start the bike.
Anything else i should pay attention to?
One other source it could be is the PCV. Maybe i need to perform the throttle calibration again.