FS: Custom Retrofitted Headlight

[HeresMyMind]

Up for sale is my retrofitted headlight

2013 headlight
Mini D2S 3.0 3" projector.
E46 extended Shroud
Blacked Out
Amber LED angel eyes from The Retrofit Source
Phillips 85122 D2S bulb.


To complete the retrofit you will need to purchase a Ballast / h4 harness for your bike.


Parts alone were - 65 for projector, 40 bulb, 20 shroud, 20 angel eye. (145$) Labor Not included.

These are better quality parts and brighter than your standard BKMoto setup.

Id like 250$ plus your stock light.

My reason for selling, is that I want to upgrade to a much larger projector that will take a lot of trimming and custom brackets to make it work.
-B

 

[SBGuy]

This may be a dumb question buuuuut would this fit a 2012? Just for reassurance

 

[HeresMyMind]

Yes this would. It would bolt right up. It will need a 20$ harness and 50$ ballast I can link you to from the retrofit source for the 100% working install.

-B

 

[SBGuy]

Yeah, could you post those link. Im interested.

 

[HeresMyMind]

404 Not Found 1

Ballast - make sure you call or email to order, so you only get 1 (65$) and not 2.

404 Not Found 1

Wire Harness

-B

 

[SBGuy]

Is that just an HID ballast/harness? I already have an HID kit on the bike if so.

 

[HeresMyMind]

Yes it is, you will need an adapter from the ballast to the d2s bulb (I have one i can give you) and the wire harness must be set for bixenon (lowbeam and highbeam)

-B

 

[Rabbitman109]

You can also order the extra parts from me, I have all required parts in stock.

 

[Darksabre]

Man, you fit a D2S 3.0 in there?...and youre going even bigger?? Did you do your own retrofit? I would have loved to have gotten some tips from you (or whoever did), as I'm tackling this project right now.

 

[HeresMyMind]

Yes i fit a D2S 3.0. I plan on putting in a EVOx-r for better highbeam!

-B

 

[Darksabre]

Yes i fit a D2S 3.0. I plan on putting in a EVOx-r for better highbeam!

-B

Nuts! I was hoping to be the first. You had to cut out the back of the stock reflector bowl to make room, right? What did you use to attach the d2s projector to the bowl? I had to rig something up using PVC reducers, haha.

 

[HeresMyMind]

i bolted it to the bowl then epoxied around the bolts to keep it snug.

-B

 

[HeresMyMind]

Decided to just further mod my headlight to accept the projectors I want.

-B